How to Connect a Fuji Xerox Wireless Printer

by

Are you exhausted from many tangling wires and power cords associated with your devices?

Why not try wireless printing? Wireless or WiFi printers allow you to print from numerous dispersed electronic devices without physically attaching a wire to the printer. Copysmart has several Fuji Xerox printers with built-in wireless purposes.

How does l connect my wireless printer? Good question. That is accurately why we are providing you with this information to make setting up your wireless Fuji Xerox printer a lot more formal.

Setting up the Fuji Xerox wireless printer

To get ongoing, you must guarantee that you have the name of your wireless Network (SSID), wireless network password, security, and encryption types. Go to Start Menu, choose Control Panel, and click Network and Sharing Centre. Click Manage Wireless Networks, and then double-click on your favorite wireless Network. Note the SSID, security, and encryption types. Dissimilar ways to join a wireless printer are described below.

WiFi Protected Setup (WPS)

WPS enables users to effortlessly secure a wireless network and attach wireless devices without accessing the router’s configuration screens or the wireless Network’s security key/passphrase. A WPS-enabled wireless access point is desired. Push the WiFi button on the control panel, then Connect WLAN. When the WiFi button flashes green, press the WPS button on your wireless access point/router. The connection has been victorious.

WPS-PIN

A WPS-PIN-enabled wireless access point/router is essential. Hit Menu on the printer control panel, choose Network and press OK. Select WLAN, and then push the OK button. Choose WPS w/PIN Code and then press the OK button. Press the [+] button to allow wireless on the printer to display the PIN. Login into your router to complete the WPS-PIN procedure on the wireless access point, and the wireless connection will be victorious. Press the OK button, and the WiFi button will turn green.

Auto SSID

Push the Menu button on the printer control panel, choose Network, and then push the OK button. Choose WLAN and press the OK button. Choose Setup Wizard and push the OK button. Allow wireless on the printer by critical the [+] button. At this stage, the printers will auto-scan the wireless Network for obtainable SSIDs. Find the SSID of your wireless Network. Enter the Network Key (Password) and then choose yes, to Apply Settings. Push the OK button to set up the connection.

Connect the Printer to a Wireless Network Using CentreWare Internet Services (CWIS)

Contingent on your network security settings, pursue the steps in one of the three sections below to attach the printer to your wireless Network.

Option 1: Configuring the Printer for Shared Key or WPA/WPA2-Personal

  1. Open a Web browser from a computer (on a similar network as the printer).
  2. In the Web browser address pasture, enter the printer’s IP address and then push Enter or Return. The CWIS home page will be displayed.
  3. Clack Properties.

 NOTE: Numerous features in CWIS require an administrator username and Password to right to use or adjust. If encouraged to enter Administrator Account login details:

  1. For User Name, enter Admin.
  2. For Password, enter the administrator account password set throughout primary admission to CWIS.
  3. Click OK.
  1. Clack Connectivity.
  2. Clack Protocols.
  3. Clack Wireless Setup.
  4. Clack Edit Settings.
  5. For Network Name SSID, select an option:
  6. To search for an SSID, click Search Obtainable and click the drop-down menu. Choose an SSID from the list. To revive the list of obtainable networks, click Refresh.
  7. To enter the SSID, click Enter SSID, and then type the SSID in the field.
  8. For Security Type, choose Shared Key or WPA/WPA2-Personal.
  9. For Encryption Type, choose an option.
  10. For Security Key or Passphrase, type the passphrase.
  11. For Address Acquisition, choose a protocol option. If you choose STATIC, you can alter the IP Address, Subnet Mask, and Gateway Mask.
  12. Clack Apply.

Option 2: Configuring the Printer for an Open System

  1. Since a computer (on the same Network as the printer) open a Web browser.
  2. In the Web browser address field, enter the printer’s IP address; after that, push Enter or Return. The CWIS home page will be displayed.
  3. Click Properties.

 NOTE: numerous features in CWIS necessitate an administrator username and Password to access or adjust. If encouraged to enter Administrator Account login details:

  1. For User Name, enter Admin.
  2. For Password, enter the administrator account password set during early entrance to CWIS.
  3. Clack OK.

4.    Tick Connectivity.

5.    Tick Protocols.

6.    Tick Wireless Setup.

7.    Tick Edit Settings.

8.    For Network Name SSID, choose an option:

  1. To search for an SSID, click Search Obtainable and click the drop-down menu. Choose an SSID from the list. To revive the list of obtainable networks, click Refresh.
  2. To enter the SSID, click Enter SSID, band then type the SSID in the field.
    1. For Security Type, select Open System.
    2. For Address Acquisition, choose a protocol option. If you choose Static, you can alter the IP Address, Subnet Mask, and Gateway Mask as desirable.
    3. Tick Apply.

Option 3: Configuring the Printer for Wireless LAN WPA-Enterprise

NOTE: superior venture networks necessitate certificates loading previous to set up.

  1. Open a Web browser from a computer (on the same Network as the printer).
  2. In the Web browser address field, enter the printer’s IP address and then push Enter or Return. The CWIS home page will be displayed.
  3. Tick Properties.

 Note: Many features in CWIS necessitate an administrator username and Password to the right of entry or modification. If encouraged to enter Administrator Account login details:

  1. For User Name, enter Admin.
  2. For Password, enter the administrator account password set throughout early access to CWIS.
  3. Click OK.
  1. Clack Connectivity.
  2. Clack Protocols.
  3. Clack Wireless Setup.
  4. Clack Edit Settings.
  5. For Network Name SSID, select an option:
  6. To search for an SSID, click Search Available and click the drop-down menu. Choose an SSID from the list. To refresh the list of obtainable networks, click Refresh.
  7. To enter the SSID, click Enter SSID, and then type the SSID in the field.
  1. For Security Type, choose WPA/WPA2-Enterprise.
  2. For Encryption Type, choose an option.
  3. For 802.1x Authentication, choose the authentication technique that your wireless Network uses.
  4. If you selected PEAP, enter the required details in the Identity Name, Username, and User Password fields.
  1. For Root Certificate Setup, execute the following steps to upload a root certificate.
  2. For Upload Root Certificate, to locate and choose the file, click Browse.
  3. Choose the certificate necessary, and then click Open.
  4. Click Download.
  1. For Address Acquisition, select a protocol option. If you select Static, you can change the IP Address, Subnet Mask, and Gateway Mask as needed.
  2. Click Apply.

Did this help? I hope it helps you. Please let us know in the comment section if you have any additional requirements. 

Leave a Comment