Permissions are essential to keep things isolated and safe on a computer. Particularly when sharing a device with others, such as a work or school computer, you want to be sure that only official people can contact definite files and documents.
The “Failed to Enumerate Objects in the Container. Entree is deprived” error typically originates when you try to alter the permissions of a file or folder. In maximum cases, this file or folder is from an outside source (a diverse computer, for example) or shared among many local users.
While this fault may look like a threatening error message initially, it’s not as frightening if you know how to pact with it. In our article, we’ll review numerous approaches to dose this mistake and restore the authorization authorizations on your Windows 10 computer.
Let’s start with troubleshooting!
OVERVIEW OF THE ERROR
In Windows 10, folder permissions allow one to keep any content saved in a folder, moreover, public or private. This is a valuable function when you have essential and delicate files that no one should retrieve. However, when you try to alter authorization authorizations for a convinced folder, there are occurrences when the error shows up.
The mutual cause of this particular error is that you are not authorized to alter anything in the folder because the possession is of some other account. You can only change something on the folder or file with an administrator controller. An additional purpose is that some improper settings on the folder are arranged without your authorization.
HOW TO FIX THE ERROR
There are positive steps you need to follow to resolve the matter. These are simple and relaxed because they involve just a few variations in Windows settings. Here are roughly of them.
Note: Before trying anything, ensure you have fashioned a restore point. Trying to dose this error contains altering system settings, which may cause system files or folders to smash or disobey.
- Optional: Boot your computer in Safe Mode
Many Windows users have stated that before troubleshooting this matter, you should boot your device up in Safe Mode.
This is optional, though; we acclaim giving it a try in case none of the approaches below is occupied for you. Here’s what you need to do to boot Windows in Safe Mode.
- Turn off your device, then hit the power button to try it back on. As soon as you see Windows opening, grip the power button until your device shuts down. Repeat this process until you enter WinRE.
- In the WinRE interface, you should see the “Select an option” page. Here, circumnavigate through Troubleshoot → Advanced options → Startup Settings → Restart.
- Your device should mechanically resume itself. The next time it boots up, you’ll see a list of selections. Select option five from the list for Safe Mode.
- Manually change the ownership of the problematic file or folder
The utmost straight route you can take to solve this mistake is physically altering the problematic file or folder ownership. Many Windows users have suggested this technique, which may work with booting your device in Safe Mode.
Here’s how you can eradicate the “Failed to Enumerate Objects in the Container. Access is denied.” mistake by altering the affected file or folder ownership.
- Right-click on the exaggerated file or folder, then select Properties.
- Change over to the “Security” tab, then clack on the “Advanced” button in the bottom-right of the window.
- Click on the “Change” link next to the file owner, just under the file name.
- Type in your account name under the “Enter the object name to choose” heading, then click the “Check Names” button. If your name converts to highlighted, click the OK button to continue. Otherwise, click the “Advanced” button to find your username from the list.
- Two new options should seem. Ensure to permit both “Replace owner on sub containers and objects” and “Replace all child object permission entrances with heritable permission entries from this object”, as shown in the image below.
- Tick the “Apply” button and re-open the Advanced Security window shown in Step 2.
- Tick the “Add” button close to the window’s bottom left.
- Tick on the “Select a principal” link.
- Under the “Enter the object name to select” heading, write in the word “Everyone” and tick the “Check Names” button.
- Click the OK button and close the windows. You should be able to try and set authorization authorizations for the exaggerated file or folder now.
- Change Folder Ownership
This is so far the greatest and only method recommended by Microsoft as well as Windows specialists. Changing folder possession has been suggested by Windows users as well, as this method resolves the Failed to Enumerate Objects in the Container. Access is denied error like an appeal. Here are the steps intricate to alter folder ownership in Windows:
Step 1: Make a right click on the folder for which you are getting the Unsuccessful to Enumerate Objects in the Container error while altering user permissions. From the right-click menu, choose the Properties option.
Step 2: Go to the Security tab in the Folder Properties window that unbolts. When in the Security tab, click on the Advanced selection.
Step 3: This will open a new Advanced Security Settings window. In the highest section, right below the Name segment, click on the Change choice in the Owner segment.
Step 4: In the next Screen, you will find it essential to enter your Windows account’s username through which you log in. You can enter your username in the Enter the object name to Choose a box.
Then click on the Check Names button to rapidly find your precise username which appears.
Note: – If you cannot find your username with this technique, click on the Advanced button below the text box to choose your username from the list of all users. In the Advanced window, click the Find Now button; a list of all usernames will be occupied at the lowest of this window named “Select user and group”. From the list, you can set your username. After choosing your username, click on the OK button.
Step 5: After you have nominated the username and are back to the Advanced Screen, two new checkmark options will seem, “Replace owner on sub containers and objects” and “Replace all child object permission entrances with heritable permission entrances from this object “, which I have shown in the screenshot underneath. Choose both these selections, then click on OK. Again, Click on OK for the Prompt that just Exploded Up.
Step 6: Now, again, come to the Security Tab.
If Everyone does not exist in Group or user names, then continue to add Everyone to the list.
Click on Advanced
Step 7: – Now, Click on Add.
Step 8: – Now, Click on Select a principal.
Step 9: – Now write Everyone and Click on Check names. Click on OK.
Step 10: – Click on OK to exit the Screen.
Now, close down all the windows, and try to set folder consent again. This step will perhaps solve the delinquent, and you won’t get the Failed to Enumerate Objects in the Container fault. In case you do, you can attempt one more thing.
If it doesn’t work, do one more thing and try
1. Go to the security tab increase.
2. Click on Administrators from the list and choose it.
3. Now, clack on edit.
4. Now, click on Administrators from the list again.
5. Now, check all Deny permissions.
6. Click on Apply and OK.
Try again and see if it works or not.
Finally
If nothing works, start fresh. Generate a new folder, add files, and then set folder authorization authorizations for other users. And remember to tell us if this functioned for you or not.
We will be so pleased to hear from you!